PVC Pool Accessories Angle 90° Oxygon fittings Elbow 90o Swimming Pool Filtration Swimming Pool Construction

Available in wholesale offer

PVC elbow 90° PN16

PVC 90° PN16 elbow for swimming pool networks, in diameters Ø25 to Ø160.

Specifications

The 90° PVC PN16 elbow changes the direction of the piping at a right angle. Made of 16 bar pressure PVC-U with solder sockets, for permanent and watertight connections to the engine room and the pool network.

Operating pressure PN16
Connection by soldering
Ø25 to Ø160

90° angle Ø25 to Ø160 — the necessary one that costs in pressure

The 90° angle changes direction in the shortest possible length and that is why it is present in every engine room, from Ø25 to Ø160 in PN16. However, it has an overlooked cost: each 90° angle is equivalent to several meters of straight pipe in pressure loss, because the water is forced to change direction abruptly and creates turbulence. Rule of thumb: never a 90° angle immediately before the pump suction — uneven flow in the impeller causes noise and cavitation.

CODE	DESCRIPTION
107.03.21	Ø25 PN16
107.03.22	Ø32 PN16
107.03.23	Ø40 PN16
107.03.24	Ø50 PN16
107.03.25	Ø63 PN16
107.03.26	Ø75 PN16
107.03.27	Ø90 PN16
107.03.28	Ø110 PN16
107.03.29	Ø125 PN16
107.03.30	Ø140 PN16
107.03.31	Ø160 PN16

FAQ

What PVC fittings do I need for a swimming pool?

The network of a swimming pool is set up with pressure PVC pipe and the corresponding accessories: 90° and 45° elbows, tees, crosses, sleeves, reductions, plugs, true union fittings, ball valves and check valves. All in soldered form, for permanent watertight connections.

What does PN16 and PN10 mean?

PN indicates the nominal operating pressure in bar. PN16 fittings withstand 16 bar and PN10 10 bar. In swimming pool networks, PN10 pipes and PN16 fittings are used for greater safety at the connection points.

How do I glue PVC components correctly?

Clean and dry the surfaces, apply PVC glue evenly to the pipe and socket, push with a slight twist until it stops and hold for a few seconds. Let it dry before applying pressure.

When do I use true union fittings?

Wherever you want to loosen the connection without cutting the pipe — before pumps, filters, valves and instruments. The nut with o-ring allows removal of the machine for maintenance in minutes.

Which diameter should I choose?

The diameter is determined by the pump flow rate and the length of the network. Typical domestic networks are set at Ø50 or Ø63, while larger or public pools at Ø75 to Ø160. Our team can help you with the sizing.

Do you sell retail or only wholesale?

OXYGON is a manufacturer and exclusively supplies wholesale professionals and stores, with spare parts and exports to 22 countries.

How do I request a quote?

Select products and diameters, add them to the order or call us at 2310 810 000 — our team will help you complete the materials list.

4,9/5 on Google

Real customer reviews of OXYGON — 130+ reviews, average 4,9.

"Impeccable service and a wide variety of products in water, pool and whirlpool treatment. The most important thing is that everything is immediately available."

"The team was consistent with the schedules, highly organized, and always available to answer questions or offer solutions to every little detail. I highly recommend them."

"One of the leading companies of its kind! If there's one thing one should keep in mind, it's definitely professionalism and dedication to the results of their work. Congratulations!"

"Really very good service and very good prices. They answer any question you may have and guide you with their knowledge to the best possible choice."

"Impeccable service and technical training in the field of swimming pools and water treatment. Specialization in identifying and correcting previous poor work by other companies."

"The entire company team is impeccable! Polite, helpful and experienced in every aspect of their work!"

"Truly the best service and honestly unbeatable prices!! Well done!!"

"Professionals, they know their stuff and care about customer satisfaction. I highly recommend them."

PVC elbow 90° PN16

90° angle Ø25 to Ø160 — the necessary one that costs in pressure

FAQ

Popular searches

4,9/5 on Google

Contact Us

PVC elbow 90° PN16

90° angle Ø25 to Ø160 — the necessary one that costs in pressure

FAQ

Popular searches

4,9/5 on Google

Related products

Metal Collar with Screw

True Union Inspection Glass

PVC glue

PVC elbow 45° PN16