Available in wholesale offer

Floor Inlet for Liner

Adjustable bottom inlet made of ABS, version for liner pools, with 2″ male threaded connector.

Specifications

Specifications

Why inflow from the floor

Return of filtered water from the bottom upIt mixes the cold water at the bottom with the warm water at the surface, so that the temperature is the same throughout the depth — important in deep and heated pools.

This is liner version: the gasket tightens the membrane and seals without risk of leakage at the puncture point — the most sensitive point of any liner pool, because it is located at the bottom under maximum hydrostatic pressure.

For concrete pools there is a corresponding version without a flange.

CODEDESCRIPTIONUSE IN SWIMMING POOLLOGIN
104.07.37Adjustable Inlet Bottom LinerPools with liners2" male screw connector
Manual — Floor Inlet for Liner

Manual & Documentation
Request the detailed installation & user manual.

Request the manual

Frequently asked questions about white pool accessories

What material are the white parts made of?
Most components (sockets, skimmers, sumps) are made of reinforced ABS with high resistance to chlorine and UV radiation. Some grates and sumps are also available in AISI316 stainless steel for maximum durability.
Ø50 or Ø63 — which connection should I choose?
It depends on the cross-section of the pool piping. Most domestic projects use Ø50, while larger or public pools use Ø63. We have versions for various connections (Ø50/Ø63/1½"–2" threaded).
Is it for a concrete/tile pool or a liner?
There are separate versions: the "concrete" fittings seal to concrete or tile, while the "liner" fittings have a flange and screws for watertight fastening to the membrane.
What is the difference between the high-level skimmer (Slim Line)?
The high-level skimmer has a larger mouth opening and is placed higher to better collect surface debris in pools with high water levels.
What is the AntiVortex bottom well?
It is a bottom drainage well with a special grate that "breaks" the suction vortex (anti-vortex), increasing the safety of swimmers and preventing entrapment.
How many inlets and skimmers does the pool need?
As a general rule, 1 skimmer per ~25 m² of surface and at least 2 inlets for good recirculation. In large or public projects the ratio increases. We are manufacturers and wholesale the entire range.

Popular searches

4,9/5 on Google

Real customer reviews of OXYGON — 130+ reviews, average 4,9.

Related products OXYGON

All products: White Pool Accessories